RynoPave RPA1 Self-Levelling Adjustable Paving Pedestal 70mm - 110mm RynoPave self-levelling paving pedestals have been designed for compatibility with all calibrated paving to allow for a flat and well-supported paving install. Height corrections between 40mm – 56mm ca... Read More
RynoPave RPA1 Self-Levelling Adjustable Paving Pedestal 70mm - 110mm
RynoPave self-levelling paving pedestals have been designed for compatibility with all calibrated paving to allow for a flat and well-supported paving install. Height corrections between 40mm – 56mm can be achieved with RynoPave paving pedestals thanks to an adjustable threaded section that allows millimeter adjustment.
Beneath the adjustable threaded section sits a height extension collar which allows installers to build up the initial pedestal height in 100mm increments, for faster build-up of tall heights. Attaching with a single click, this is secured onto the supporting base which has wide design to protect any membranes below and spread the load of the paving more evenly. Water drainage holes in the base have the dual use of draining water away and allowing the base to be fixed to a surface.
A slope correction of up to 10.5%, the equivalent of 6 degrees, self-levels to the angle required so no levelling shims are required. Thanks to the threaded section and the self-levelling paving support head, there’s no need for any shims when using RynoPave adjustable paving pedestals. This means you won’t have jobs or installs slowed down by a lack of shims.
On top of the self-levelling paving support head spacer tabs sit to provide consistent spacing between paving slabs for an accurate and aesthetically pleasing finish to the system. Manufactured from mould-resistant, algae-resistant, alkali-resistant, and bitumen-resistant recyclable polypropylene, RynoPave pedestals can support up to 2100kg compression so there’s no need to worry about the strong polypropylene.
Height Range: 40mm-56mm
Question:
Hi Our flat roof is going to be re-covered with roofing felt; can the rynopave pedestals be used on top of roofing felt? Thanks
Answer:
Yes these would be suitable.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
