Experience the timeless beauty of natural slate with the SVK Ardonit Blue/Black Textured Fibre Cement Slate Roof Tile. It combines a traditional relief with straight corners for a charming, modern aesthetic that's an increasingly popular choice among roofers. The striking Blue... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Experience the timeless beauty of natural slate with the SVK Ardonit Blue/Black Textured Fibre Cement Slate Roof Tile. It combines a traditional relief with straight corners for a charming, modern aesthetic that's an increasingly popular choice among roofers. The striking Blue/Black finish provides an authentic slate appearance, while the choice of sizes allows you to find the perfect fit for your project.
Both tiles sizes are vertically structured for a distinctive look and with a double-coloured, environmentally friendly acrylic coating, the Ardonit Textured slate tile is suitable for both roofs and façades. The paint used to coat these tiles also contains moss-resistant properties, helping to prevent the growth of nuisance moss.
Plus, with structural integrity that far surpasses the requirements needed to meet European standard EN 492, you can rest easy knowing your tiles are highly durable and long-lasting. They are also designed to withstand even the harshest weather conditions.
Please note:
Question:
Do these slates have pre drilled holes for fixing
Answer:
Yes they are pre drilled
Question:
What is the thickness?
Answer:
1mm thick
Question:
How many required per m2
Answer:
13.1 slates per m2
Question:
How heavy is a single tile
Answer:
Approx 20-22kg per m².
Question:
Could I lay the straight on pan board?
Answer:
No You would need to batten
Question:
Are these without the rivet hole?
Answer:
Yes they come with a rivet hole
Question:
Is the batten spacing the same as natural slate
Answer:
Yes the same as a natural slate
Question:
how many are there in a meter square please with a 45 degree angle. cheers Ash
Answer:
13.1 tiles per m2
Question:
Hi, can I have a sample of this roof tile?
Answer:
Please email in with your full address
Question:
The product says it is suitable for pitches 15 degrees to 90 but the answer above says 22.5 degrees? Can you confirm?
Answer:
This is an error on the listing we will get changed (apologies), as these slates are holed it is min pitch 22.5°. To install lower you need unholed slates and to hook fix them at a larger headlap.
Question:
How many tiles are needed per m 2 for a 15degree roof?
Answer:
14 slates per m² but these can not be installed as low as 15°, min pitch is 22.5°.
Question:
Hi, what are the differences between the SVK Montana Textured Fibre Cement Slate Roof Tile, SVK-MONTANA-TEX-F-C-SLATE 600 x 300 Blue/Black and the SVK 600mm x 300mm Ardonit Textured Fibre Cement Slate Roof Tile - Blue/Black? They appear the same in the photos.
Answer:
This Ardonit has a textured face and smooth square edge, whereas the textured Montana has a textured face and also a riven edge to it.
Question:
Hi, can you advise on the setting out pattern for a 17 degree pitch with a close cut hip arrangement. I'm thinking about how to use the 600 squ tiles cut to suit the hip joint. Thank you.
Answer:
Best to check over the PDF installation guide you can find linked below.
https://www.roofingsuperstore.co.uk/user/u/pimp/uploads/attachments/2/svk-slates-low-pitch-data-sheet.pdf
Question:
what is the tile wieght per metre?
Answer:
Approx 20-22kg per m².
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
