Rubber Roof Liquid Flexible Waterproof Coating - 5kg (Black)

Code:

RubberRoof5

Brand:

This Rubber Roof liquid flexible waterproof coating from EcoProof is an ideal option for various domestic, commercial and industrial applications, including pitched and flat roofs, guttering, as well as structural waterproofing. Both environmentally kind and easy to apply by ha... Read More

View full product details

View questions about this product

£73.00 Incl. VAT

Earn points

Est. Delivery: 1-3 Working Days

Shipping costs displayed in basket.

View Transport Policy

View full product details

View questions about this product

Create a wishlist

Matthew Woods

Description

Both environmentally kind and easy to apply by hand, Rubber Roof exhibits incredible adhesion, working as a safe option for waterproofing and refurbishing traditional roofing systems and single-plies, new or existing.

Features & Benefits: Rubber Roof Liquid Flexible Waterproof Coating - 5kg (Black)

No VOCs or solvents
Easily applied with liquid formula
Cost-efficient with a 20-year life expectancy
Fully bonded
Suited to a variety of domestic, commercial and industrial applications
Excellently UV resistant and waterproof

For fully bonded and flawless applications, Rubber Roof has your back. It is liquid-applied and seamlessly smoothed out with a brush or a roller, working best with two-coat applications. Each coat covers at a rate of 1 litre per m².

Standards & Certification

CE Certified

Please note:

If needed, buying a primer and reinforcement tape (150mm x 100mm & 300mm x 100mm) can provide the best finishes.

Specification

There are no product specifications to show.

Downloads

Questions & Answers

Question:

What amount and products would I need to coat twice or 3 times on a 35 year old slight sloping slate garage roof.would I have to put any top coat material on it. What would be the cost please.

Answer:

I would need the size of the roof

Question:

Is this ok for rosemary roof tiles?

Answer:

No this is for flat - or close to flat roofs only

Question:

Can this be used over mineral felt

Answer:

You would need to brush as much as possible off and you may need to apply an extra coat of rubber as it is only 1mm thick

Question:

How do you apply it

Answer:

Here is an install guide

https://www.roofingsuperstore.co.uk/user-guides-brochures/rubber-roof-black-installation-guide.html

Question:

I note you need a dry day to apply this product, what happens if it rains the day after or there is an overnight frost just after applying it?

Answer:

As long as the first coat had dried you should not have any issues

Question:

Can this product be applied to an old asbestos flat roof on my garage which has now become porous in places and leaks badly in winter. Would l also need to prime the roof first as l have had problems getting Bitumen paint etc to adhere to the Asbestos surface ?

Answer:

You could use this but if the surface is porous you would need to use a flood coat first to prime the surface.

Question:

is this safe to paint a water coarse on fishpond?

Answer:

This is only suggested for roofing, I am afraid it is not tested for ponds so could be hazardouse to the fish.

Question:

hi there can this product be poured over an old ash felt roof or would i need to prime it first

Answer:

For installation advice please refer to the PDF guide on the page above.

Question:

Do i need to prime first before I use the flexible waterproof coating on my existing felt?

Answer:

The suppliers advise use of a Flood Coat on porous surfaces like concrete but should not be wholly necessary for felt. But is must be cleaned/free of debris and bone dry before applying Liquid Rubber.

Question:

Hi, do you need a primer with this product? Thanks

Answer:

Not a primer but if you are applying to a porous surface you should use the Flood coat first, please see below from suppliers data sheet.

'If Rubber Roof is being used on a porous surface such as concrete, prior to preparation proceed with applying EcoProof Flood Coat to the area using a brush or roller at a typical application rate of 4-5sq/m per ltr (may vary depending on surface condition) and allow to cure.'

Question:

can this product be used on a wooden shed roof ?

Answer:

Yes this would be fine but on porous surfaces best to use the flood coat first before applying.

https://www.roofingsuperstore.co.uk/product/ecoproof-liquid-rubber-membrane-flood-coat-5-litres.html

Question:

How does this compare to products like ronseal isoflex?

Answer:

This is comparable as also a Liquid Rubber System and high quality.

Question:

can this product be used on lead? what surfaces can it be used on?

Answer:

This would not be suitable for use on Lead I am afraid. It is mainly suitable for felt/concrete/asbestos roofs but if you email us any photos of the roof you have to cover to sales@roofingsuperstore.co.uk we can always check with the suppliers for you.

Question:

Can this product be used in tropical weather?

Answer:

It would really depend on the maximum expected temperature. If you wanted to email more details to us at sales@roofingsuperstore.co.uk we can look into it for you. Please also be aware we do not offer delivery outside of the UK.

Question:

Do you apply this to a wet or dry existing felt roof

Answer:

The Rubber Roof needs completely dry material in order to apply it and also a dry couple of days to be able to cure fully so not suitable for wet application I am afraid.