As one of the most versatile natural slate ventilators available on the market today, this Nature Vent will coordinate perfectly with any slate by easily using a piece of the same slate, cutting on site and fitting it into the bottom section. Simply an unobtrusive grill without... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
As one of the most versatile natural slate ventilators available on the market today, this Nature Vent will coordinate perfectly with any slate by easily using a piece of the same slate, cutting on site and fitting it into the bottom section.
Simply an unobtrusive grill without any unsightly plastic 'mushrooms' to ruin your roof, this Nature Vent is coloured Black to blend into your roof finish. This natural slate vent is suitable for soil vent termination or extractor fans with an optional flexi pipe. Alternatively, it can just ventilate your roof void.
Created by one of Europe's prominent producers of roof ventilation products, this Nature Vent is fabricated from UV-stabilised material using design technology which has been developed, proven and tested throughout over 30 years of experience in this specialised area.
Please note:
Question:
Can the grill be removed after the vent has been installed? I would like to be able to inspect the back box occassionaly to remove any dirt or debris that comes off the roof and may get through the grill.
Answer:
I don't believe you can sorry
Question:
We have a 4-inch (110 mm) flexible pipe from a cooker hood/extractor to attach to this Nature Vent. Will we need an adaptor sleeve to make the connection? If we do need an adaptor do you supply them?
Answer:
This unit doesn't need an adaptor
Question:
What is the size of the inlet to these - can it be connected to a 150mm MVHR pipe?
Answer:
No, It has a 110mm outlet
Question:
What is the size of the spiggot on the inside to take a pipe?
Answer:
Outlet: 110mm
Question:
It looks like this should be fitted when roof is being slated. Can it be retrofitted without stripping slates up to ridge or have you anything similar that can be installed simply? Many thanks
Answer:
You would need to take a few Slates off around where you are fitting then dress them back in, a roofer should be able to do this with minimal disruption. If you wanted something a lot quicker though search for 'Economy Slate Vent' on the site, those ones only offer passive ventilation but can be easily slid into place once the slate you are replacing is removed.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
