Providing a visually pleasing yet subtle ventilation entry through the roof surface, this Double Pantile Flush Fit Roof Tile Vent from Hambleside Danelaw's HD TV15 range has been designed for use with Double Pantile roof tile profiles, including Marley Mendip and Redland Grove... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Providing a visually pleasing yet subtle ventilation entry through the roof surface, this Double Pantile Flush Fit Roof Tile Vent from Hambleside Danelaw's HD TV15 range has been designed for use with Double Pantile roof tile profiles, including Marley Mendip and Redland Grovebury. It can easily replace a single tile while maintaining a flush-fitting look to the roofline, whether used at a low or high level.
In comparison to most other tile vents with a 10,000mm² ventilation area, this roof tile vent boasts a greater ventilation area of 15,000mm², so fewer vents are required per metre for roof space ventilation. A large spigot area immediately below the ventilation louvres creates less back pressure on any extractor systems/fans connected and allows for clear air paths. Additional adaptors are also available and can be fully utilised for soil pipe ventilation and mechanical extraction.
With interior weathering protection to maintain free airflow whilst channelling any water ingress out of the vent and onto the roof covering, this vent is fabricated from polypropylene for thermal stability and durability. With a non-reflective surface, it is UV-stabilised to avoid embrittlement over time.
Rest assured, this vent has undergone a thorough assessment by BCL (Birmingham City Laboratories) and received approval from the Birmingham City Council, making it a fitting choice for any housing project. It successfully meets the stringent standards set for actual airflow dimensions, thermal shock resistance, free-thaw cycles down to -20°C, and protection against inclined water ingress. With such endorsements, you trust that it not only complies with industry benchmarks but also surpasses expectations in key performance areas essential for residential applications.
There are no product downloads to show.
Question:
Hi, could you please advise on an adaptor for mechanical extraction for this tile. Many Thanks.
Answer:
Please see a link to the correct adaptor below.
https://www.roofingsuperstore.co.uk/product/soil-pipe-adaptor-kit-for-roof-tile-vent-adaptor-only-pack-of-5.html
Or the adaptor with pipe below.
https://www.roofingsuperstore.co.uk/product/soil-pipe-adaptor-kit-for-roof-tile-vent-complete-kit-pack-of-5.html
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
