With a large actual ventilation area of 15,000mm², this Hambleside Danelaw Castellated Flush Fit Roof Tile Vent ensures that fewer units per metre are required. A large spigot area directly below the ventilation louvres enables clear air paths and generates less back pressure ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
With a large actual ventilation area of 15,000mm², this Hambleside Danelaw Castellated Flush Fit Roof Tile Vent ensures that fewer units per metre are required. A large spigot area directly below the ventilation louvres enables clear air paths and generates less back pressure on any connected extractor fans/systems. With internal weathering protection, this roof tile vent has been designed to maintain free airflow whilst directing any water ingress out of the vent and onto the roof covering.
Fabricated from polypropylene for thermal stability and durability, this roof vent is UV stabilised and has a non-reflective surface to inhibit embrittlement over time. It's created for use with the Marley Ludlow Major roof tiles and delivers an aesthetically pleasing yet subtle ventilation entry through your roof surface. The profile vent can retain a flush-fitting appearance to the roofline whether used at a low or high level and can simply replace a single tile.
Please note:
There are no product downloads to show.
Question:
What are the dimensions of this vent?
Answer:
Approx 420 x 330mm.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
