Everbuild Silicon Sealant 700T - Black (C3)

Name: Everbuild Silicon Sealant 700T - Black (C3)
Brand: EVERBUILD
SKU: 700TBK
Price: 5.99 GBP
Availability: LimitedAvailability

Code:

700TBK

Brand:

EVERBUILD

Free UK Delivery

This item is out of stock and not available to purchase.

View alternative products

As a cost-effective solution for your sealing needs, this EVERFLEX SILICONE 700T is a low modulus, neutral, oxime cure RTV silicone sealant that bonds to both porous and non-porous surfaces without requiring priming. Its high viscosity grade ensures excellent tooling propertie... Read More

View full product details

View questions about this product

Create a wishlist

Debbie Tuck

Description

Ideal for a range of applications, including perimeter pointing, weather and joint sealing to pre-formed panels and soft metal sealing, this versatile sealant is perfect for use on uPVC, wood and plastic trims and components. It's also suitable for use as an expansion joint sealant and for general draughtproofing, as well as parapet and roof weather sealing. Before application, you should ensure the surface is clean, dry and free from grease, dust and other contaminants. You can use EVERFLEX PVC SOLVENT CLEANER on PVC or white spirits on painted surfaces. If priming is needed, Everbuild Silicone Primer P1 for porous and NP2 for non-porous substrates can be used.

Features & Benefits: Everbuild Silicon Sealant 700T - Black (C3)

Excellent adhesion to most common surfaces, including wood, plastics, metals and glass
10 linear metres coverage at 9mm x 9mm fillet joint
Suitable for use on polycarbonate
Exceptional external weathering properties
Low dirt pick, ideal for uPVC work
For perimeter pointing around window frames
Can be used as an expansion joint sealant
Compatible with soft metals such as zinc, copper and lead
Perfect for general draughtproofing, including repair work over existing sealant
18-month shelf life from date of manufacture

For joint design, make sure to follow the recommended minimum width of 5mm and depth of no less than 5mm to accommodate maximum movement. Movement capacity will be impaired if the depth is larger than the width. Joints above 10mm wide should be half the width in depth up to 20mm and a minimum of 10mm for even wider joints. For deeper joints, use EVERFLEX FIX AND FILL FOAM or a suitable joint backer rod to reduce the depth. All joints should be designed to avoid water retention or traps and triangular fillets should be no less than 12mm across the face with a flat or convex face.

Application is easy with a standard sealant gun, and using a spatula or piece of wood to smooth down the sealant is essential for a proper bond. When cutting the top of the cartridge, take care not to damage the thread. Apply the nozzle and cut at a 45° angle with an opening slightly larger than the gap to be sealed. Optimal results can be achieved by keeping steady pressure on the trigger with the gun at a constant angle to the surface. To improve the appearance of the joint, use masking tape on both sides and remove it within five minutes of application.

Standards & Certification

Compliance with the Construction Product Regulation: Certified under the harmonised European standard EN15651 for façade, cold climate and sanitary applications

Please note:

You should always carry out adhesion tests before large-scale use due to the quality of plastics varying. Priming is not typically required but it is advised to test small areas prior to use.
Ensure proper storage between 15°C and 30°C in the original, unopened container.
EVERFLEX SILICONE 700T is not suitable for use with bitumen asphalt, neoprene or certain organic elastomers or on substrates that bleed plasticisers, solvents or oils. It is also not over-paintable, so you should use WEATHER MATE for this purpose. It is not suitable for bedding I. G Units; you should use Silicone 450 instead. Additionally, during the manufacture of aquariums, you should use AQUA MATE, not this sealant.