Manufactured from durable, smooth concrete, this twice weathered coping stone from Eurodec is 35mm thick at the edges and 50mm thick at the apex and will protect the top of your wall from water penetration. The simple weathered design feature allows rainwater to run off the to... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Manufactured from durable, smooth concrete, this twice weathered coping stone from Eurodec is 35mm thick at the edges and 50mm thick at the apex and will protect the top of your wall from water penetration. The simple weathered design feature allows rainwater to run off the top of the stones, preventing water from pooling. Available in a selection of colours, why not choose a colour that complements other features around your home or garden, such as patio tiles or decking boards?
The stones feature drip grooves located on the underside of the stone, which help to divert rainwater away from your wall. They are 10mm wide and positioned 20mm from either side of the stone. These grooves help reduce water damage to the wall and prevent water staining, which can occur over prolonged exposure.
Due to being manufactured from natural, quarried materials, there will inevitably be variations in some coping stone colours from one batch to another. It's also worth noting that the actual finish will not be revealed until a period of exposure to sunlight and some weathering has occurred. All Eurodec coping stones are resistant to fading caused by UV rays in average climate conditions.
Please note:
Question:
Hi, what is the height of this coping stone please?
Answer:
35 - 50 - 35 mm (50mm being the height of the middle bit)
Question:
What is the width between the drip channels on the 600mm x 280mm coping stone
Answer:
The channels are approx 15mm in from the side and 10mm wide so we advise best to allow 25mm overhang each side to accomodate them.
Question:
How long it takes to deliver to CF35NF?
Answer:
These are made to order so you can view the lead times on the product page, as they can fluctuate.
Question:
Hello. The base looks narrower than the top. If so what is the width of the base on the 230mm ones please?
Answer:
The edges are straight, but the stones are 35mm high at the edges raising to a 50mm peak down the centre.
Question:
Is there any product you would recommend for bedding the above copes in place?
Answer:
You can either mortar them or the suppliers provide the below adhesive.
https://www.roofingsuperstore.co.uk/product/2-part-pu-adhesive-65kg-bucket-covers-3-square-metres.html
Question:
Hi, how far are the drip grooves from the edge of the coping?
Answer:
They are approx 15mm in and 10mm wide we always advise to leave at least 25mm overhang each side to allow for them.
Question:
Can this product be used for topping cavity walls?
Answer:
Yes this stone is suitable for topping a cavity wall, please allow 25-30mm overhang each side.
Question:
What is the width between the grooves. Just asking in case your coping stone does not cover the wall
Answer:
The grooves are set 15mm in from the edge of the stones and are approx 10mm wide, so we advise to leave 25mm overhang either side.
Question:
Can you please tell me the weight of each one.
Answer:
Approx 20kg.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
