From the Hambleside Danelaw continuous verge range, this Glass Reinforced Plastic (GRP) Dry Verge provides permanent weather protection for slate roof verges. It can be fitted in all weather conditions, delivering a neat installation without the need for special components at ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
From the Hambleside Danelaw continuous verge range, this Glass Reinforced Plastic (GRP) Dry Verge provides permanent weather protection for slate roof verges. It can be fitted in all weather conditions, delivering a neat installation without the need for special components at junctions. This HDL DV8 verge has been specially designed for face-fixing applications with slates.
Measured from the distance between the top and bottom verge lip is the verge opening gap height, while the width is the measurement between the gable wall or barge board to the exterior face of the verge profile.
Please note:
Question:
Can this product be used in combination with artificial slates on an existing roof as a remedy for mortar that has been or is becoming dislodged?
Answer:
Technically Yes
Question:
Can this product fit under the facia/capping board as I’m fitting new pvc boards
Answer:
As long as the facia sits under the C shaped part
Question:
How do you join these?
Answer:
Place them next to each other making sure there is no gap for water to get in between. There are no specific joiners for this product.
Question:
the slates are cement fixed at the verge and it varies in depth from 60mm-70mm with a overhang off about 50mm will this product open up to accommodate this thickness. plus i was looking at sticking it on with Stick like s*it.
Answer:
It should be able to accomodate that overhang but would be best to mechnically fix the vertical face part not just use adhesive to ensure it holds firm.
Question:
Brochure states these are supplied in packs of 10, is the above price for 1 unit or 1 pack?
Answer:
This listing is per length so you can order as many as you need.
Question:
Is this the verge you use when the roof has already been slated and you nail this to the rafter?
Answer:
Yes the flat face on this would be fixed to the barge boards/fascia down the verge of the roof?
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
