This Water-Based Deck Adhesive from ClassicBond is suitable for use as the main area adhesive and has been specially fabricated for use with ClassicBond and Firestone EPDM roofing membranes. This low-odour, high-strength, water-based acrylic adhesive is ideal for various flat ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
This Water-Based Deck Adhesive from ClassicBond is suitable for use as the main area adhesive and has been specially fabricated for use with ClassicBond and Firestone EPDM roofing membranes. This low-odour, high-strength, water-based acrylic adhesive is ideal for various flat roof/deck surfaces and can be roller-applied.
This ClassicBond WBA will bond the ClassicBond EPDM membrane to an array of traditional timber roof surfaces such as OSB and plywood. All boards must not be sealed with adhesive-repellent waxes or other non-absorbent systems but should be impervious to moisture. If you have any doubts, a small test area should be applied. Some roof surfaces might not be suitable for use with this adhesive, for example, low vapour permeability or non-porous roof decks like existing GRP or metal.
Question:
Do I need to use a bonding agent on the edges of a small log cabin roof or can i just use this adhesive right to the edges?
Answer:
You can use this for the whole roof if going onto boards, you would only need the contact adhesive if doing any detailing or dressing up upstands etc.
Question:
Is it possible to adjust position of The EPDM before the adhesive sets I am putting 9. Sq. metres of EPDM onto a summerhouse roof, I do not usually do this type of covering. Any advice would be appreciated, it’s heavy stuff to lift up onto a roof, any tips?
Answer:
When using the waterbased adhesive some adjustment is possible, but best thing to do is first lay out the sheet so you know it is square, then fold it over on itself and do one side then vice verca.
Question:
Would this be the right product to use with EPDM membrane to fix on shed roof?
Answer:
Yes this is the correct adhesive to bond EPDM to a timber deck.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
