Designed for use in British Gypsum partition and wall systems where greater levels of sound insulation are needed, this Gyproc SoundBloc plasterboard has a higher-density aerated core that is covered in and firmly secured to strong paper liners. Suitable for drylining internal... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreDesigned for use in British Gypsum partition and wall systems where greater levels of sound insulation are needed, this Gyproc SoundBloc plasterboard has a higher-density aerated core that is covered in and firmly secured to strong paper liners. Suitable for drylining internal surfaces, it is certified to BES 6001 achieving a rating of 'Very Good'.
When fixing this plasterboard, fit the boards with the decorative side out to receive a skim plaster finish or joint treatment. Gently butt the boards together but never force them into place. Install the fixings no closer than 10mm from bound edges and 13mm from cut edges. Eliminate paper burrs with fine sandpaper and position cut edges to the inside angles whenever achievable. By a minimum of 600mm between layers, stagger vertical and horizontal board joints. Locate the board to the middle line of framing where this supports board ends or edges.
The blue face of this Gyproc SoundBloc can be plastered with either Thistle Board Finish or Thistle MultiFinish. There should be a minimum delay between completing the lining and starting plastering. The Gyproc jointing materials deliver a robust joint reinforcement and a constant, crack-resistant, sleek surface that is ready for preparatory work and the finishing decorative touches. Multiple joint specifications are available to suit the method of application, site preference and board type. After the joint treatment has dried, priming and the final decoration should follow as quickly as possible.
This Gyproc SoundBloc plasterboard can be cut by scoring with a sharp knife and snapping the board over a straight edge or with the use of a plasterboard saw. With a sharp knife or utility saw, holes for socket or switch boxes should be cut out before fixing the boards.
Please note:
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
Pay in 4 interest-free payments of £5
Learn more