This Acrypol + roof coating provides a complete, protective, waterproof system and has been specifically developed to refurbish failed domestic, commercial or industrial flat roofs and conduct day to day maintenance requirements. This Medium Grey Acrypol+ coating is generally ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
This Acrypol + roof coating provides a complete, protective, waterproof system and has been specifically developed to refurbish failed domestic, commercial or industrial flat roofs and conduct day to day maintenance requirements. This Medium Grey Acrypol+ coating is generally used for patching repairs, blending into surrounding building material colours.
In severe weather conditions, it is very rarely possible to perform remedial repairs, as the surfaces are normally required to be completely dry when treating for an effective long term repair of water penetration problems associated with leaking roofs. However, Acrypol+ is applicable during damp weather conditions while providing a long term solution to the problem. Featuring one-coat, all-weather application properties combined with a straightforward process, makes this Acrypol+ an especially appealing choice if you are employing your own labour for general property maintenance.
As an acrylic resin dispersed in a solvent to form a semi-liquid paste, Acrypol+ dries into a durable, ultra-tough, seamless, elastic overlay. This coating film inhibits the passage of water, yet it is chemically structured to enable trapped moisture to evaporate, thus preventing blisters from forming. Featuring incorporated additional fibres that behave like a built-in scrim while increasing the tensile strength of the dry film to make it more robust, these fibres interweave when the Acrypol+ coating is applied, bridging and filling cracks and gaps with a width of up to 10mm.
Normally Acrypol+ does not require any Sealer or Primers, however on rare occasions with friable/highly porous surfaces such as asbestos, concrete or when stone chippings have been removed, Acrypol+ may obtain better application results by initially applying the recommended Acrypol Sealer. In specific areas when tensile strength is not of vital importance and minimal structural movement occurs, for example, corrugated asbestos sheeting or when spray application of the coating is needed, standard Acrypol is available without fibres.
Question:
Is it ok to use on a flat felt roof
Answer:
Yes, depending whats already on the roof
Question:
Is it ok to walk on flat roof with acrypil on it ?
Answer:
Technically yes, however, in the summer it will become stick and leave foot prints
Question:
Acrypol+ has been applied over a rubber /EDPM roof. The flat roof is used as a terrace and has a wooden frame supported by rubber disks. On top of the frame are the boards. I understand the product can become tacky in the summer, will this work as a solution to stand on the terrace?
Answer:
No this will not work
Question:
Hi, Can this product be applied directly to OSB boarding?
Answer:
Technically, No
Question:
Will this adhere to kingspan roof panels coated with plasticol and joining to osb board to seal upstand around roof windows
Answer:
Technically yes with the acrypol scrim
Question:
Hi is this suitable to paint on to lead flashing that’s cracked and is leaking?
Answer:
Yes, but I would also use the scrim mesh to go that extra mile
Question:
Can this be applied over old sealant between a plastic soil pipe and a lead flashing tile to seal a leak that has formed?
Answer:
This should work yes
Question:
can this product be used to fix a leak on an EPDM roof
Answer:
Yes it would work but you may be better off using EPDM tape, please call in and one of the team will talk you though it
Question:
Can this be painted on top of a felt roof as a permanent repair?
Answer:
This product can be used on a felt roof, however, if there is an issue already I would advise using the acrypol scrim as well
Question:
Can this be painted over fibre roof to stop the leaking due to cracks created by the hot weather
Answer:
Yes as long as it has something to key into
Question:
Can you paint this on to steel shipping containers?
Answer:
You can but it will remain tacky in hot weather - And is not designed for sea weather if you are still using it for shipping
Question:
Can you paint over it when dried red tile paintjohn
Answer:
No this is not suitable for painting over.
Question:
Is this suitable for a GRP roof whose top layer is flaking off?
Answer:
Yes you could apply it but would need to clear any flakes from the roof first and scuff the suface to help it bond. Also Acrypol remains tacky in warm weather so not suitable for walking on.
Question:
hi can I paint my concrete fiber roof sheets with this paint to make it water proof thank you
Answer:
Yes this is a perfect paint on waterproofer for fibre cement sheets.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
